Yekaterina Posted July 11, 2021 Report Share Posted July 11, 2021 8 hours ago, azayrahmad said: I don't think this is multiple instance problem. I've restarted and run Scenario Editor from shortcut first thing after restart, still got the same error. Checked task manager, no pyrogenesis.exe. I also don't think it's missing files as it is retrieved from SVN, I have compared local binaries/system with repo and it has the same content. Probably this is wxwidgets? Never have heard of this before, but previously never had problems like this as well. I have just installed wxWidgets and how do I activate it? Another solution: build without atlas options enabled, then copy this file into the binaries/system folder and relaunch. It should allow you to launch Atlas in Windows. Make sure you have wxwidgets installed correctly though, ticking all options as you install. AtlasUI.dll Quote Link to comment Share on other sites More sharing options...
Stan` Posted July 11, 2021 Report Share Posted July 11, 2021 I've launched an autobuild. For some reason it's redownloading all svn so might take a while. Quote Link to comment Share on other sites More sharing options...
Yekaterina Posted July 11, 2021 Report Share Posted July 11, 2021 12 minutes ago, Stan` said: I've launched an autobuild. For some reason it's redownloading all svn so might take a while. I am trying to rebuild on a windows laptop from scratch (the same laptop as the one used in my Youtube video) On that day it produced an error when I added --enable-atlas option. Today I retry without atlas option, then put the atlas.dll into the directory and the Atlas editor launched without error. What I did differently today was using the powershell to execute update-workspaces.bat without any additional options. Quote Link to comment Share on other sites More sharing options...
Stan` Posted July 11, 2021 Report Share Posted July 11, 2021 4 minutes ago, Yekaterina said: I am trying to rebuild on a windows laptop from scratch (the same laptop as the one used in my Youtube video) On that day it produced an error when I added --enable-atlas option. Today I retry without atlas option, then put the atlas.dll into the directory and the Atlas editor launched without error. What I did differently today was using the powershell to execute update-workspaces.bat without any additional options. --enable-atlas and --disable-atlas Those options have no effect on windows, as they are only recognized by update-workspaces.sh Which is not called at all on windows. The only option that exists on windows is --atlas Defined in https://trac.wildfiregames.com/browser/ps/trunk/build/premake/premake5.lua 1 Quote Link to comment Share on other sites More sharing options...
Yekaterina Posted July 11, 2021 Report Share Posted July 11, 2021 2 minutes ago, Stan` said: --atlas I think this is what I meant. Spent too long on Arch Linux and forgot about Windows 1 Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 16, 2021 Report Share Posted July 16, 2021 Besides that my warship can magically materialize projectiles, it is also a total stormtrooper. Looks like it always aims at the head of that poor fisherman, naturally that would be hard to hit. (I assume the inner circle shows the minimum range, so that shouldn't be the issue?) Quote Link to comment Share on other sites More sharing options...
Yekaterina Posted July 16, 2021 Report Share Posted July 16, 2021 2 hours ago, Gurken Khan said: Besides that my warship can magically materialize projectiles, it is also a total stormtrooper. Looks like it always aims at the head of that poor fisherman, naturally that would be hard to hit. (I assume the inner circle shows the minimum range, so that shouldn't be the issue?) I think structures and siege are given an 'elevation bonus' and 'launch height' which changes the trajectory of the projectile. However, this is often not shown on actors and there is something worrying about projectile physics in 0ad: the value of gravitational acceleration (approximately 9.8ms^-2 on Earth) varies for different structures and units! This is the stats for a Quinquereme: @Gurken Khan There are many issues with ships in 0ad and they are overlooked because most TGs happen on Mainland. If you can kindly start a new thread to report all of the problems you have spotted with ships that will help a lot. Most bugs and balancing issues for ships are trivial. 2 Quote Link to comment Share on other sites More sharing options...
BreakfastBurrito_007 Posted July 16, 2021 Report Share Posted July 16, 2021 8 minutes ago, Yekaterina said: 0ad: the value of gravitational acceleration (approximately 9.8ms^-2 on Earth) varies for different structures and units! This is the stats for a Quinquereme: Reminds me of that old Italian fellow with the different sized metal balls. 1 Quote Link to comment Share on other sites More sharing options...
smiley Posted July 16, 2021 Report Share Posted July 16, 2021 (edited) 1 hour ago, Yekaterina said: However, this is often not shown on actors and there is something worrying about projectile physics in 0ad There is no such thing as physics. Projectiles themselves are delayed damage handlers working with rather straightforward linear transformations. There are purely visual actors accompanying them, but by all means, as far as game logic is concerned, they don't do anything. Actual ballistics, and projectiles as entities dealing damage on collision is an interesting concept. None of the math will be extremely complex, so maybe an experiment for modders. I don't think several hundred projectiles would be that big of a performance concern even for JS mods since projectile paths would be approximated. Also, while on the topic of ships and realism, there is also this, I don't know where the code is though. Edited July 16, 2021 by smiley 3 Quote Link to comment Share on other sites More sharing options...
jdag Posted July 17, 2021 Report Share Posted July 17, 2021 now that a25 has shadow draw distance, it need to be uncoupled from the zoom of the camera so that it's always based on the fixed point that the camera is pointed at for consistency. 1 Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 17, 2021 Report Share Posted July 17, 2021 I guess the sandy beach is supposed to look like at the very top; all those rectangular areas below don't look very natural. (Pyrenean Sierra) 1 Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 17, 2021 Report Share Posted July 17, 2021 My Theatron won't build: My women are hammering their best, but there is no building progress; you can also see that there's no numbers beside the hammer. I had to delete the building and do it again, then it progressed fine. There was some kind of flash on the screen when I first gave the order to build it, but I don't know if that got anything to do with anything; also the logs didn't register anything. savegame-5362.0adsave Quote Link to comment Share on other sites More sharing options...
Silier Posted July 17, 2021 Report Share Posted July 17, 2021 from looking at the screenshot it is possible you do not have visual on the center of the foundation therefore you see mirrage of it from the time when you placed it. Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 17, 2021 Report Share Posted July 17, 2021 @AngenSorry, I don't get it. I also fail to see the difference to the second try: Quote Link to comment Share on other sites More sharing options...
Silier Posted July 17, 2021 Report Share Posted July 17, 2021 If you switch view to observer, you will see progress is done on the foundation. Current issue with foundation is that they do not provide any vision by themselves so as long as you do not have sufficent vision on the object, what means your vision has to reach to the center point of the structure, you will see the mirrage of the object, what means last state you saw the object when you had vison on it. 1 Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 17, 2021 Report Share Posted July 17, 2021 42 minutes ago, Angen said: If you switch view to observer, you will see progress is done on the foundation. That's interesting. And feels very wrong. 43 minutes ago, Angen said: Current issue with foundation is that they do not provide any vision by themselves so as long as you do not have sufficent vision on the object, what means your vision has to reach to the center point of the structure, you will see the mirrage of the object, what means last state you saw the object when you had vison on it. I got the words the first time, I just didn't want to believe it. And it also doesn't make it clear to me why my women would have more vision on the object while hammering on it in the second pic than while hammering on it in the first pic. Quote Link to comment Share on other sites More sharing options...
wowgetoffyourcellphone Posted July 17, 2021 Report Share Posted July 17, 2021 1 hour ago, Angen said: Current issue with foundation is that they do not provide any vision by themselves I thought at one point they did? (a small visual that would otherwise be inconsequential, just big enough to be selected and see its progress/health). 32 minutes ago, Gurken Khan said: I got the words the first time, I just didn't want to believe it. And it also doesn't make it clear to me why my women would have more vision on the object while hammering on it in the second pic than while hammering on it in the first pic. Position of the units. Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 17, 2021 Report Share Posted July 17, 2021 46 minutes ago, wowgetoffyourcellphone said: Position of the units. Hm. I guess they might be a unit's finger's width closer to the building in the 2nd pic. I still think it's fundamentally wrong that it is possible to not see a building you're working on. 1 Quote Link to comment Share on other sites More sharing options...
wowgetoffyourcellphone Posted July 17, 2021 Report Share Posted July 17, 2021 23 minutes ago, Gurken Khan said: Hm. I guess they might be a unit's finger's width closer to the building in the 2nd pic. I still think it's fundamentally wrong that it is possible to not see a building you're working on. I agree. Quote Link to comment Share on other sites More sharing options...
Old Roman Posted July 20, 2021 Report Share Posted July 20, 2021 (edited) Quick question: Do any of the armor improvements and appropriate weapon improvements apply to Champion cavalry or only apply to Infantry in A25? (that would be the options in the blacksmith as opposed to the stable) thanks Edited July 20, 2021 by Old Roman forgot to mention blacksmith Quote Link to comment Share on other sites More sharing options...
Freagarach Posted July 20, 2021 Report Share Posted July 20, 2021 4 hours ago, Old Roman said: Quick question: Do any of the armor improvements and appropriate weapon improvements apply to Champion cavalry or only apply to Infantry in A25? (that would be the options in the blacksmith as opposed to the stable) thanks They apply to Infantry and Cavalry. Quote Link to comment Share on other sites More sharing options...
Den Posted July 22, 2021 Report Share Posted July 22, 2021 I wanted to make a map with some of the buildings already present to speedup the gameplay. Sorry, but map editor is too complicated for newbies. Also I got some errors on generating. Can you please make it more userfriendly? Thanks. Quote Link to comment Share on other sites More sharing options...
Freagarach Posted July 22, 2021 Report Share Posted July 22, 2021 @Den You can try the "Fortress" random map, I think you'll like it! Quote Link to comment Share on other sites More sharing options...
Gurken Khan Posted July 22, 2021 Report Share Posted July 22, 2021 10 minutes ago, Freagarach said: You can try the "Fortress" random map, I think you'll like it! I hate the uneven mineral distribution on Fortress; I suppose it's meant to be a feature and not a bug. Quote Link to comment Share on other sites More sharing options...
Freagarach Posted July 24, 2021 Report Share Posted July 24, 2021 On 27/06/2021 at 7:13 PM, Gurken Khan said: Hrmpf, why does my trader lose his cargo when I simply tell him to step aside? Don't think that's how it used to be. Fixed in https://code.wildfiregames.com/rP25835. 3 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.