Leaderboard
Popular Content
Showing content with the highest reputation on 2019-04-08 in all areas
-
6 points
-
Hi everybody! After all these excellent updates from the various artists, inside this game community, maybe it's time for a task force to update the game maps? Maybe also to review the various old maps and.. eliminate some of them?! I believe that the most recent quality parameter for maps is higher than the parameter adopted during the game development primordium.4 points
-
3 points
-
I almost did that also, but decided that it would confuse people, so I didn't. The reason I considered doing that was because I wouldn't mind a siege workshop in town phase as long as most powerful siege weapons were not available until city phase. I wouldn't want powerful siege weapons like our current battering rams available in town phase, but would be OK with the simple carried log battering ram in town phase. There was no way to properly express this with the current poll options. [Edit] This was basically covered in the @wowgetoffyourcellphone post.2 points
-
2 points
-
people vote siege workshop out of the town phase but vote battering ram into the town phase Lord have mercy what are y'all doin2 points
-
Could I request banana and mango trees? Mangifera indica Musa balbisiana Also, a variation that is twice the size and height of the current mangrove tree could be possible. I commute daily to the University I am enrolled in and mangroves are a common sight in my daily trip. Mangroves could grow enormously that you could mistake them for being island themselves. Twice the size (height and circumference) of the current one is the largest that I could estimate based on what I see daily.2 points
-
2 points
-
Hello everybody. A long time ago I suggested here a possible entry on 0 A.D. on Wikibooks Wikimedia project. As nobody felt motivated to do it, I started it this week. The main idea is, throughout the chapters of the book, allow people to know not only the characteristics of the game but also a little of the history of its development, its technical challenges, and attempts on the adequacy and fidelity to the historical aspects, as the game put a strong emphasis on historical accuracy. In order to follow the rules of the Wikibooks project, the book does not intend to be a strategy guide and/or a walk-through. So, it is a start. I think it will be funny to write about the project in a way different from what we can get on Wikipedia. - https://en.wikibooks.org/wiki/0_A.D. Regards, Sturm1 point
-
Obviously Themistocles is a naval focussed hero. I don't have any particular issue with this, but it means that he is never used for land maps for any good reason. I think that it would be nice to give him a buff for wall construction either in speed or cheapness. He was instrumental in Athens completing the long wall and their city walls after Persia had sacked the city. What are your thoughts?1 point
-
I have edited some maps, this one is a play on Sporades Islands, download it and reply if you all like it. Sporades Islands Update.xml.7b89f62b1f016a6b.xmb I recommend moving your new file to the ".cache" file then "0AD" inside of that then to the "user" then "maps" then "skirmishes " and leave it in there. Hope you like it!1 point
-
Probably missing "<castshadow/>" in the actor, like most of the current grass do.1 point
-
1 point
-
Calling the gameplay modders i remember for a helping hand: @wowgetoffyourcellphone @Angen @ffffffff @borg- I Ask for a helping hand in this case for any1 of you guys if possible, to start a github mod for the gaul redesign, proposed by @Genava55 so i can properly implement the rest of the shields and give a more in depth, historical accurate, and interesting Celtic factions in a Kushite/Seleucid Scale. The main goal of this mod is for having a base for the changes done in the celtic roster including the carnyx if desired, and later branch that changes if you guys want into your mods, but having the Master only with the historical accurate changes. Otherwise for having also the alternative of the deffault vanilla roster @Genava55 may i request also a distribution for the actual roster in the meantime?1 point
-
@feneur Can you lift his post limit please, thanks. @Speed_Freak If you are on Mac Os you don't have a firewall so something else is blocking your connection. Are you on a restricted network, such as a school or a public place ?1 point
-
While not ideal, DE makes this work with the 'Upgrade' feature. You can switch the Maiden Guard from Sword to Bow to Flaming Arrows and back.1 point
-
Hi! What do you mean by that? (can you detail it a bit more?)1 point
-
Old mango trees are quite enormous too, even surpassing the height of mature coconut trees.1 point
-
1 point
-
1 point
-
3. Should all factions have a battering ram? Yes, even if just 2 or 4 dudes carrying a log. In fact, you could have the "dudes+log" be the default battering ram in Town Phase, and then there be a "Covered Battering Ram" upgrade come in City Phase.1 point
-
And the word censor doesn't even catch them1 point
-
I prefer the one here at the Royal Ontario Museum even if they did not bother trying to get the paint right the style is a much better take on Greek Classical statues .Will give me an excuse to visit my youngest brother in Toronto and take some photos. Enjoy the Choice1 point
-
1 point
-
Anyway, this kind of triskelion with spiraling branches is far more common and developed in the British Isles, especially during the Roman period. Good question. I know Egyptian built some kennel in mud bricks but I don't think it was the case in Europe's prehistory. I agree with your suggestion for the houses. It could be a powerful asset for the Britons as well.1 point
-
A Gym/Universe setup would be great but 0ad isn't a simple Atari 2600 environment ;-) I haven't looked much @ it since Hannibal dev kinda died down but in retrospect really what I think the launcher (https://github.com/agentx-cgn/Hannibal/blob/master/launcher.py) was doing was to dump game state and let a sub python process (ML/RL) analyze and then pass it back up to one of the managers in Petra when decision making on the next action (gather/attack/defend/etc). Really the first step is to try to strip down pyrogenesis to bare bones w/ 1 civ and 1 map somehow (and of course keep it inline w/ master branch), otherwise you are looking @ 2GB public.zip - in nutshell the eye candy graphics nothing pertaining to the bare bone of the AI planning. At the moment it is easier to test ideas w/ something micro like, https://github.com/santiontanon/microrts and then bring it back into 0ad, probably as a mod itself. Another interesting thread I came across:1 point
-
Stone and Wood should suffice, yeah. (same as in DE) I also have a yuge problem with a lot of the costs of things in vanilla, technologies especially. I don't think anything should cost more than 2 different resources except for special cases.1 point
-
I don't request a subforum about special units, it's just a topic about that without any other purpose to speak of that in a generic way It seems the post above was posted in the wrong topic, am I wrong?1 point
-
While reading old irc logs from 2010-2011, I read ideas about having different path of "upgrading" soldiers depending of the civ. I don't quote but that idea (from "Mythos") was: for example: - cart upgrades by ethnicity - pers upgrades Infantry and Cavalry separately - greek upgrade by unit type (spearmen, javeliners, ...) - celt, iber upgrade by weapons (sword, spear, ...) There are things like that in DE mod and there was also in WFG 0ad before almost all was flatten in the blacksmith. Let's talk.1 point
-
Well, the wall placer choses closest wall piece length (small / medium / long) and the excess length is hidden inside the turrets, no other means of hiding that I'm aware of. Pretty sure one can extend from every turret, @Hannibal_Barca has perfected his skills of placing walls in places that noone expects to be buildable and can perhaps post an exemplary screenshot. How would the mechanism work with standard lengths? Just no hiding inside wallpiece lengths? I wouldn't be surprised if that's already possible with the templates, @s0600204 was the last one to work with these wall templates in vanilla and might know. But the problem is that if there is literally no adaptation, that players might not be able to seal off their walls. Consider an area that has the length 10 meter / feet / bananas, but wall piece lengths are fixed to size 4. Then you can either cover 8 or 12 meters / feet / bananas. If there is some terrain obstruction at 12, one won't be able to close the wall off at all. And walls are only effective if units can't walk past them. Even if there are no obstructions anywhere and the player only wants to create one ring of walls, the last piece might not fit perfectly and thus remain open. If you don't mean to remove adaptation of wall piece lengths, I don't know what you mean. At least in some cases I agree, two wall turrets very close together looks ugly (can also break the balancing). @vladislavbelov We were discussing a random map generation problem in the post above. Currently we have a mapsize² grid, that's up to (512 tiles)² and realized using an array containing a JS typed array (u8 I think). (1024)² already gives out of memory errors, that's why 0 A.D. mapsize is limited to 512. The purpose of the grid is to remember an arbitrary area, for example all water on the map, or all forests. The problem is we need to increase the resolution of the grid if we want higher quality random maps that look as good as on this screenshot. And we need one grid for every information to remember (one grid for water, one grid for trees, ...). The area can be arbitrary, so it uses rasterization (for example paths are very random). So we can't store the shapes. So do you perhaps have a recommendation how to store a rasterized area with as few memory as possible without too much performance loss? In many cases, the area will only be a small subset of the map area (only 10% of the map have paths), but in other cases, it may be a lot (30% of the map being forest). I thought about BSP to improve lookup times, but I'm not sure how we can save memory when working with so many high resolution grids?1 point
-
The ingame wallbuilding changes the size so as to adapt to the playerchosen area to cover. There are small medium and long wallpieces, and any length is achieved by hiding excess wall length inside the turrets. I guess you know that already. The problem is that it sometimes looks odd? It should be possible to adapt the length numbers in the templates to not get ugly results. If one only uses fixed length pieces, it won't be possible to wall off some passages. It might even result in not being able to close a circle if there would be no adaptation. So if they sometimes look ugly, I think it should be possible to use better numbers, so that the ingame wall placement algorithm can chose 3 medium wall pieces that look better than 4 short ones for instance. Or what's the issue that needs remodeling? I forgot the OOM. That was the reason we support mapsize 512 (giant) and not 1024. You are right that one could avoid initializing a grid for the entire map, but only allocate memory for the parts of the map that were written too. The problem is that it map authors probably need to be able to create something the the high res grid and then refer to that grid later on. So one can't discard the grids automatically after a single processing step. Using Binary_space_partitioning one could access the high-res-grid areas with good performance. However partial grids won't save much if the the majority of the map area uses these grids. Map authors could deallocate the grids if they don't need it anymore, but a solution that doesn't require these additional steps would be easier to handle. I recall the alternative was just storing all entity shapes, which could be extended to include visual actor shapes. The RandomMap object already has a list of entities stored and can easily lookup the obstruction sizes of the few templates used by the map. With BSP one could do the collision tests quickly. Actually we don't want to test for obstruction collisions but want to mark arbitrary areas on the map with a tag (tileclass), but that could still be solved by storing area formulas instead of rasterizing them.... At least for rectangles and disks that would work, but not really for paths, meh. Perhaps these grids could be eh compressed with lzma...dunno...1 point
-
1 point
-
My mother was a French speaker but we where living in an English speaking province(Ontario) so we were confined to the backyard of our house Mum didn't know/trust the neighbours who where all people she could not speak to as she did not talk de English so my younger bother and I observed all the kids in the neighbourhood playing and we just wanted friends so we broke out and had lots of fun and started teaching Mum English about three months later she got to know the neighbours Enjoy the Choice1 point
-
1 point
-
1 point
-
Yeah we kinda agree, that's what classes are for. But there is a difference between the "first wave" of special buildings (the ones in design docs) and the "second wave" (the ones used in the DE manner - placed on the map and giving a bonus). But well we can first focus on the above stoas? Why those models? History? Wrong "Royal" name? Purpose? ...1 point
-
1 point
-
I am the copyright holder of original works I post in the Wildfire Games 0 A.D. Art Development forum. I hereby release all original works I uploaded to this forum in the past, and those I will upload in the future, under the Creative Commons Attribution-Share Alike 3.0 Unported license.1 point
-
This game is amazing, I've been looking for something like this for awhile now. I love city builder RTS games and I've been looking for a game that has anything to do with Egypt and this fits me perfectly. I do want to know though if you'll be expanding on the building aspect of it? like Id really like to fill my kingdom with different structures or statues and pyramids, obelisks, even adding roads would be awesome, because right now it kinda feels empty with just the same few structures1 point
-
The purpose of Wildfire Games is to create free software. From what I can tell 0 A.D. is one of the highest quality free video games and probably the most qualitative free RTS videogame. It seems silly to depart from that unique position to become a lower tier proprietary RTS. Doing free software means that one can't sell licensed copies of code or artfiles like thankforpie proposed if one wants to remain an organization operating exclusively to produce free software (because free software grants everyone the right to make free copies). That doesn't mean that one can't use crowdfunding to further 0 A.D. And the fact that free software is a charitable cause gives WFG and donors tax-exemption at least.1 point
-
In my perspective following the thorsberg (wood planks) shield and the covered leather. Wood: Base Shape of the shield structure. Player color - Celtic Design: Leather cover teared from hits revealing the wood, (i wish i could give bump map in that teared zones making it look like scratches) 1- Yesterday Texture already commented by stan | 2 - Texture used in most of the shapes | 3/4 - New texture baked today adding wood planks, and teared leather cover (player color) above both player color and celtic design. Edit: Added specular map and norm map with the affected zones here the result: Note: Both textures can be applied to the shields by leaving the damaged variant when healths drops below % Amount.1 point
-
1 point
-
Raising funds to do this was an utter disaster that drove one past WFG team leader to madness.1 point
-
1 point
-
The 3d models are all made by me (my own), but I relinquish any rights to them when they are shared here. The texture for the ground is Alpine grass mixed/edit with Savanna forestfloor b red.1 point
-
1 point
-
Hi Stanislas69 and thank you for the welcome. Thank you, also for the clarification. I just assumed everything created went for peer review and acceptance prior to inclusion in the game, as is done on my project at my day job. Everything we do is reviewed and tested prior to inclusion into our software. I guess, I just assumed it was also the norm for your organization. I will contact @Nescio and @Itms about what is needed most at this time. Thanks again for your information, Dok1 point
-
Hi Nescio and thank you for the welcome. In answer to your questions, as I stated in my application, I am interested in all forms of documentation needed by the project. I would be very interested in working with the in-game documentation you referred to. I did see several places in the game where the information was sparse to say the least. I have heard of LaTex and Markdown, but have never used them. I am familiar with XML and HTML as I use them in my day work. I use a product produced by Madcap software called "Flare." I am also familiar with Dreamweaver, Muse and Edge (Adobe products) for generating HTML. I use WordPress and ServerPress for website building. https://play0ad.com is where I downloaded the game to begin with. I have also explored many of the links on the "Development" tab (trac) to begin my work on the bible for my own use. I have registered with "code", thanks to your inquiry, but not yet to "trac". I will do that today. Your last question kind of stumps me as I am not sure what the context of the question means. Are not all volunteer,s that are welcomed into the midst, belong to the "team" or is there another hierarchical level that I am not aware of that has a different pathway then the rest of the volunteers? Either way, I do not believe I can truthfully answer that question, being as I was just welcomed and have no idea yet of your project status or what has been done and what is still needed. Is there a POC for documentation or a documentation manager that I can contact to find out where I would be needed the most? If that is you, by any chance, then great. Let me know what you would like me to do. In the meantime I will start looking at the in-game documentation and start researching the information. Thanks, Dok1 point
