balduin Posted May 16, 2020 Share Posted May 16, 2020 I was able to play 0 A.D. on the Raspberry Pi 4. My setup and hardware: Raspberry Pi 4 with 4 GB of RAM Raspbian (based on Debian 10) 0 A.D. installed via package manager version Kennwood re-release 23b. OpenGL 2.1 first I tried to play 0 A.D. with the standard settings. However, the Frames Per Second (FPS) rate was very low, therefore I set all the graphics settings to the lowest settings possible. My FPS number increased slightly. However, my FPS rate was between 5-15 FPS. Most of the times it was around 10 FPS. Furthermore, there are other topics in this forum regarding 0 A.D. on the Raspberry Pi 4 or the Raspberry Pi 3. The reason why I created another post is to discuss 0 A.D. on the Raspberry Pi in general. My objective in this post is not to overwhelm the reader with compiler flags and other optimizations. I only want to report my experience as a normal user. 1 1 Link to comment Share on other sites More sharing options...
ribez Posted May 20, 2020 Share Posted May 20, 2020 i think this guy is one of the most expert for rasperry pi gaming. He also tried 0 A.D. in the near past. 1 Link to comment Share on other sites More sharing options...
Sturm Posted June 9, 2020 Share Posted June 9, 2020 Any try with the ALL NEW 8Gb version? Link to comment Share on other sites More sharing options...
Stan` Posted June 9, 2020 Share Posted June 9, 2020 Well I only have the 4GB version but I don't expect a huge improvement Anyone with one is welcome to try and report it though. it would also be nice to try with other similar cards and ideally Open Source Hardware 1 Link to comment Share on other sites More sharing options...
audrey Posted June 10, 2020 Share Posted June 10, 2020 (edited) Here are the highlights: A 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU (~3× performance) 1GB, 2GB, or 4GB of LPDDR4 SDRAM Full-throughput Gigabit Ethernet Dual-band 802.11ac wireless networking Bluetooth 5.0 Kodi nox Two USB 3.0 and two USB 2.0 ports Dual monitor support, at resolutions up to 4K VideoCore VI graphics, supporting OpenGL ES 3.x 4Kp60 hardware decode of HEVC video Complete compatibility with earlier Raspberry Pi products Finally ditched the microUSB as a power connector Edited June 11, 2020 by audrey Link to comment Share on other sites More sharing options...
Roburetto Posted July 12, 2020 Share Posted July 12, 2020 I have installed 0AD on a Raspberry Pi 4 today (from Raspbian repo) and it worked out of the box like a charm at full screen with a 21:9 (2560x1080) monitor. No lags. Great graphics. 2 Link to comment Share on other sites More sharing options...
balduin Posted December 19, 2020 Author Share Posted December 19, 2020 @Roburetto thanks. I might give it another try. Link to comment Share on other sites More sharing options...
Maxximo Posted November 2, 2021 Share Posted November 2, 2021 On 12/07/2020 at 3:22 AM, Roburetto said: I have installed 0AD on a Raspberry Pi 4 today (from Raspbian repo) and it worked out of the box like a charm at full screen with a 21:9 (2560x1080) monitor. No lags. Great graphics. Hi, could you please share some screenshots? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now